Cranksets

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The SHIMANO ULTEGRA R8000 series crank features lightweight crankarms, a hollow outer chainring, and a wider gear pitch for increased clearance on modern road frames.
- Lightweight crankarm design optimized for power-transfer efficiency
- Wider gear pitch increases clearance between chain and leading teeth, providing compatibility with frames of O.L.D. 135 mm and 410 mm chain stay length

- Chainline: 46.9mm

- Bottom Bracket: Not included - SM-BBR60 / SM-BB72

- Tighter gear steps than 1X drivetrains make it easier to maintain pedaling rhythm

- 31-48T: Shimano's widest range gravel-oriented double crank.

- GRX 12 speed, hollow arm double crankset.

The new FC-RX820-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm.

The Shimano FC-RX820 crank balances weight savings, optimized efficiency and an array of gearing options that cater to the segmented demands of mixed-terrain riding.

- Gravel-optimized 48-31t gear combination ratios preserve riding rhythm on rough surfaces
- The 17t range covers an array of riding conditions
- Smaller gear steps for cadence control on mixed-terrain riding
- Hollowtech II crank arms provide strength and stiffness with the benefit of weight savings
- Compatible with HG 12-speed chains
- 47mm chainline
- 151mm Q-factor

The new FC-RX820-1 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm.
- GRX 12 speed, hollow arm 1X crankset.
- Narrow-wide 40T chainring.
- Gravel specific gearing ratios with 1X simplicity and wide-range gearing.
- Bottom Bracket : Not included - SM-BBR60 / SM-BB72.
- Chainline: 50.1mm.

Built for the rigors of Enduro World Series racing, FC-M9220 is the strongest XTR crankset ever produced. HOLLOWTECH II forging and a thicker steel spindle ensure this crank survives the burliest of impacts while optimizing rigidity and weight. Combined with the reinforced SM-CR96 direct-mount chainring (chainring sold separately), there is a specification of FC-M9220 for every enduro rider. - A thicker enduro-specific spindle raises the mark for durability and big-hit survivability - Shimano’s Hollowtech II hollow forging provides optimal weight, stiffness and rigidity for Enduro riding and racing - An enduro-optimized 176mm Q-Factor brings race-feel familiarity, while a 55mm chain line offers maxed-out frame compatibility - XTR M9220 cranks come standard with a steel 24mm spindle and are compatible with Shimano’s threaded and Press Fit bottom brackets (bottom bracket sold separately) - Compatible with all SM-CRM96 chainrings (chainring sold separately) - Anodized aluminum crankarms

- SLX M7100 12 speed crankset - Fits Boost and non-Boost MTB - Hollow forged crank maximizes power transfer while limiting weight - Premium-looking two tone finish - Direct mount chainring type - Q-factor : 172mm - Chainline : 52mm

- Non-series FC-MT210-2 / MT210-B2 double crankset for 2 x 9 speed drivetrains - Shimano's most affordable, outboard bearing Hollowtech II cranks - Simpler and faster shifting than triple cranks - 22-36 gearing, perfect for trail riding - Chainline: 48.8mm chainline (FC-MT210-2), for 135mm/142mm frames, or 51.8mm (FC-MT210-B2), for Boost 141mm/148mm frames - Aluminum crank arms - Highly durable riveted steel chainrings - Requires SM-BB52 bottom bracket, not included

- XT M8130 12 speed crankset - Fits 157mm SuperBoost MTB frames - Hollow forged crank maximizes power transfer while limiting weight - Direct mount chainring type - Q-factor : 181mm - Chainline : 56.5mm

Shimano's new FC-RX600-11 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding, with tighter gear steps for maintaining optimum pedaling cadence. The 2x11-speed crank is available in a 46-30T or 40T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T, 40T

From the Shimano CUES series was designed for reliable performance and a harmonious pedaling feel in road bike as well as gravel use. The two-piece construction improves stiffness without unnecessarily increasing the weight. The result benefits not only efficient power transmission, but also riding enjoyment.

From the Shimano CUES series was designed for reliable performance and a harmonious pedaling feel in road bike as well as gravel use. The two-piece construction improves stiffness without unnecessarily increasing the weight. The result benefits not only efficient power transmission, but also riding enjoyment.

Shimano, CUES FC-U6030-1, Crankset, Speed: 9/10/11, Spindle: 24mm, BCD: 110, Hollowtech II, Black, Road Disc

The new FC-RX610-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm.
- GRX 12 speed, double crankset.
- 30-46T: Shimano's widest range gravel-oriented double crank.
- Tighter gear steps than 1X drivetrains make it easier to maintain pedaling rhythm
- Bottom Bracket: Not included - BB-RS500/BB-RS500-PB.
- Chainline: 46.9mm

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

The two-piece Deore M6200 Trail/Enduro crankset is built around rigidity, durability and quality, delivering a responsive crankset that keeps you rolling consistently, optimized for the balance of strength and weight following the XTR/XT design. The aluminum crankset features a steel chainring for added strength, while the DYNAMIC CHAIN ENGAGEMENT+ technology eliminates worry around dropped chains.

• Two-Piece Construction for a rigid and durable aluminum crankset spinning on a 24 mm steel crank spindle
• Features DYNAMIC CHAIN ENGAGEMENT+ special gear teeth profile that is designed for use in single-chainring configurations for XC, enduro, and trail riding to provide more chain retention and smoother pedaling - even over bumpy terrain
• Durable steel direct mount chainring offers extended service life
• Designed for 55mm chainline and 148 Q-Factor

The Shimano CUES FC-U6000-2 crankset provides reliable and smooth all-terrain performance.

• 2-pc design provides increased rigidity with less weight
• Durable and lightweight aluminum crank arms
• For frames with 68/73mm bottom bracket shells
• BB-MT501 or BB-MT500-PA bottom bracket recommended (sold separately)
• Outbound bottom bracket required
• Compatible with LINKGLIDE AND HG 11-speed chains

Grow your confidence riding hard over the rough stuff with this Shimano CUES FC-U6000-1 crankset's wide-range gearing and seamless pedaling.

• Dynamic Chain Engagement+ special gear tip shape improves chain engagement and retention for smooth riding over rough terrain
• 2-pc design provides increased rigidity with less weight
• Durable and lightweight aluminum crank arms
• For frames with 68/73mm bottom bracket shells
• BB-MT501 or BB-MT500-PA bottom bracket recommended (sold separately)
• Outbound bottom bracket required
• Compatible with LINKGLIDE AND HG 11-speed chains

The new FC-RX610-1 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm.
- GRX 12 speed, 1X crankset.
- Narrow-wide 38T or 40T chainring.
- Gravel specific gearing ratios with 1X simplicity and wide-range gearing.
- Bottom Bracket: Not included - BB-RS500/BB-RS500-PB.
- Chainline: 50.1mm.

Grow your confidence riding hard over the rough stuff with this Shimano CUES FC-U4000-1 crankset's wide-range gearing and seamless pedaling.

• Dynamic Chain Engagement+ special gear tip shape improves chain engagement and retention for smooth riding over rough terrain
• Durable and lightweight aluminum crank arms
• For frames with 68/73mm bottom bracket shells
• BB-UN101 LL123 bottom bracket recommended (Sold separately)
• Compatible with LINKGLIDE AND HG 11-speed chains

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The Tourney TY501 crankset provides crisp, reliable shifting for your triple chainring drivetrain. - Precision indexed shifting - 8/7/6-speed compatible - 3 crank length specification available - Precise chain line control - Light and reliable shifting - Versatile performance - Wide compatibility with multiple components - Quick and precise assembly

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset

Forged for race confidence, the M9200 XTR XC crankset represents evolution in Shimano’s iconic HOLLOWTECH II cold hammer hollow-forging process. Rigid enough for optimal power transfer, compatible with SM-CR96 chainrings in all sizes (sold separately), the FC-M9200 checks every box for a lightweight, reliable cross-country crankset. - Crankarm and steel spindle strike a balance between reliable power transfer and lightweight for top-level XC performance - Shimano’s Hollowtech II cold hammer forging provides optimal weight, stiffness, and rigidity for XC riding and racing - An XC-optimized 170mm Q-Factor brings race-feel familiarity, while the 55mm chain line offers maximum frame compatibility. - XTR M9200 cranks come standard with a 24mm spindle and are compatible with Shimano’s threaded and Press Fit bottom brackets (bottom bracket sold separately) - Compatible with all SM-CRM96 chainrings (chainring sold separately) - Anodized aluminum crankarms

- 2-PIECE CRANKSET for 142 mm or 148 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 172 mm - Direct mount chainring - Chain Line 52 mm - 1x12-speed

Kick your mountain biking into gear with the performance and durability of an Alivio MT210 crankset. - High-quality anodized finish - Precise and reliable shifting

From the Shimano CUES series was designed for reliable performance and a harmonious pedaling feel in road bike as well as gravel use. The two-piece construction improves stiffness without unnecessarily increasing the weight. The result benefits not only efficient power transmission, but also riding enjoyment.

From the Shimano CUES series was designed for reliable performance and a harmonious pedaling feel in road bike as well as gravel use. The two-piece construction improves stiffness without unnecessarily increasing the weight. The result benefits not only efficient power transmission, but also riding enjoyment.

- FC-M315-2 double crankset for 7 and 8 speed drivetrains - Simpler and faster shifting than triple cranks - 22-36 gearing, perfect for trail riding - 48.8mm chainline, designed for 135mm QR and 142mm thru-axle frames - Aluminum crank arms - Highly durable riveted steel chainrings - Crank bolts included - Requires LL123 square taper bottom bracket